Chapter 94 Wireless Switch Channel And Power Command List - D-Link DWS-3160-24TC Cli Reference Manual

DWS-3160 Series Gigabit Ethernet Unified Switch CLI Reference Guide
Chapter 94 Wireless Switch Channel
config wireless channel_plan [an | bgn] [mode [interval | manual | time] | interval [<int 6-24> |
default] | time [<start_time hh:mm> | default] | history depth [<int 0-10> | default] | action
[apply | clear | start]]
config wireless power_plan [mode [interval | manual] | interval [<int 15-1440> | default] | action
[apply | clear | start]]
show wireless channel_plan [an | bgn]
show wireless channel_plan history [an | bgn]
show wireless channel_plan proposed [an | bgn]
show wireless power_plan
show wireless power_plan proposed
94-1 config wireless channel_plan
Description
This command is used to configure automatic wireless channel planning on this Switch.
Format
config wireless channel_plan [an | bgn] [mode [interval | manual | time] | interval [<int 6-24>
| default] | time [<start_time hh:mm> | default] | history depth [<int 0-10> | default] | action
[apply | clear | start]]
Parameters
an - Specifies to configure the wireless channel plan mode for 802.11a/n.
bgn - Specifies to configure the wireless channel plan mode for 802.11b/g/n.
mode - Specifies the wireless channel plan mode for each 802.11a/n and 802.11b/g/n frequency
band.
interval - Specifies to compute and apply new wireless channel plans at the configured
interval.
manual - Specifies to compute and apply new wireless channel plans only when requested
via the user interface. This is the default option.
time - Specifies to compute and apply new wireless channel plans at the configured time.
interval - Specifies the wireless channel plan interval.
<int 6-24> - Enter the wireless channel plan interval used here. This value must be between 6
and 24 hours. The default value is 6 hours.
default - Specifies that the default value will be used.
time - Specifies the wireless channel plan time.
<start_time hh:mm> - Enter the wireless channel plan starting time here. This value must
follow the hh:mm format. The default value is 00:00.
default - Specifies that the default value will be used.
history depth - Specifies the number of wireless channel plan history iterations.
<int 0-10> - Enter the number of wireless channel plan history iterations used here. This value
must be between 0 and 10. The default value is 5.
default - Specifies that the default value will be used.
action - Specifies to request manual wireless channel plan actions for each 802.11a/n and
802.11b/g/n frequency band.
apply - Specifies to apply the entire proposed wireless channel plan.
clear - Specifies to clear the current proposed wireless channel plan.
and Power Command List
862