Playing The Vcr; Tracking - Samsung DVD-VR330 Manuel D'instructions

5 -1
If you press the √ll button, the Slide Show
Speed screen will appear.
Press the œ √ buttons to set the slide show
speed, then press the ENTER button.
DVD-RW(VR)
Slide Show Speed
Slow Normal
JPEG01
MOVE PHOTO
-2
5
Press the ENTER button with a picture selected
in the Album screen and select a display mode
(Album screen (
Rotation ( ) or Zoom (
buttons, then press the ENTER button.
DVD-RW(VR)
JPEG01
MOVE PHOTO
: Returns to the Album screen.
: The unit enters slide show mode.
Before the slide show can begin, the picture
interval (Slide show speed) must be set.
: Each time the ENTER button is pressed, the
picture rotates 90 degrees clockwise.
: Each time the ENTER button is pressed, the
picture is enlarged up to 4X(four times the
normal size).
normal size
• Press the ANYKEY button to display menu bar.
• Press the RETURN button to clear the menu bar.
Fast
ENTER RETURN
), Slide show ( ),
)) using the œ √
ENTER RETURN
2X 4X 2X

Playing the VCR

1 Insert a standard VHS tape into the VCR deck.
• When a tape is inserted, power will turn on auto-
matically.
Press the √
II
(PLAY/PAUSE) button on the
2
remote control or on the front panel of the unit.
The videotape will begin to play automatically if
the Record Safety Tab is removed and Auto Play
is turned on.
Record Safety Tab
3 Press the (STOP) button on the remote control
or on the front panel of the unit.

Tracking

The Tracking adjustment removes the white lines that
sometimes appear during playback because of slight
differences in recording decks. The CH/TRK ( /
button will automatically align the recorded tracks with
the playback heads to solve this problem. You may also
set tracking manually.
1 Adjust Tracking Manually During playback, press
the CH/TRK ( / ) buttons to remove white lines
from the picture.
)
English - 55