Basic Functions; Playing A Disc; Using The Search And Skip Functions; Using The Display Function - Samsung DVD-C450 User Manual

D. Connections to a TV Interlace / Progressive
- Using component video cables, connect the COMPONENT VIDEO OUT terminal on the rear of
the DVD player to the COMPONENT IN terminal of TV.
- Using the audio cables, connect the AUDIO (red and white) OUT terminals on the rear of the
DVD player to the AUDIO (red and white) IN terminals of TV. Turn on the DVD player and TV.
- Press the input selector on your TV remote control until the Component signal from the DVD
player appears on the TV screen.
- Set the Video Output to I-SCAN/P-SCAN in the Display Setup menu. You can use the VIDEO
SEL. button to change the Video Output mode.
Note
- What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace
output method has. Progressive scanning method can provide better and clearer picture quality.
- There is no component video displayed when "SCART-RGB" Selected by pressing VIDEO
SELECT button on remote control.
COAXIAL CABLE
WHITE
BLUE
RED
RED
YELLOW
B
VIDEO CABLE
AUDIO CABLE
D
A COMPONENT CABLE
SCART CABLE
YELLOW
WHITE
RED BLUE GREEN
RED
2-Channel stereo ampilfier,
RED WHITE
Dolby digital or
C
DTS amplifier
WHITE
GREEN
RED
Do not use the connection
Scart and Component Video
(Y.Pb,Pr) Simultaneously

Basic functions

Playing a Disc

Before Play
- Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV
remote control.
- If you connected an external Audio System, turn on your Audio System and set it to the correct
Audio Input.
After plugging in the player, the first time you press the DVD POWER button, : If you want to
select a language, press a π/† button then press ENTER (This screen will only appear when you
plug in the player for the first time.) If the language for the startup screen is not set, the settings
may change whenever you turn the power on or off. Therefore, make sure that you select the lan-
guage you want to use. Once you select a menu language, you can change it by pressing the
button on the front panel of the unit for more than 5 seconds with no disc in the unit. Then the
SELECT MENU LANGUAGE window appears again where you can reset your preferred language.

Using the Search and Skip Functions

During play, you can search quickly through a chapter or track, and use the skip function to jump
to the next selection.
Searching through a Chapter or Track
During play, press the SEARCH ( or
Note
DVD 2X, 4X, 64X, 128X
- The speed marked in this function may be different from the
actual playback speed.
CD 2X, 4X, 8X
- No sound is heard during search mode (Except CD).
Skipping Tracks
During play, press the SKIP ( or ) button.
- When playing a DVD, if you press the SKIP (
the SKIP ( ) button, it moves to the beginning of the chapter. One more press makes it move to
the beginning of the previous chapter.
- When playing a CD, if you press the SKIP (
SKIP ( ) button, it moves to the beginning of the track. One more press makes it move to the
beginning of the previous track.

Using the Display Function

When Playing a DVD/MPEG4
1. During play, press the INFO button on the remote control.
2. Press the π/† buttons to select the desired item.
3. Press the √/® buttons to make the desired setup and then press the ENTER button.
4. To make the screen dissapear, press the INFO button again.
) button on the remote control for more than 1 second.
) button, it moves to the next chapter. If you press
) button, it moves to the next track. If you press the
■ /
5