Table of Contents
Advertisement
Operating instructions
5
Press the Start button
Stopping or changing a program
Press and hold the Stop button for three
seconds.
NOTE!
The program will not be affected if you change
the program selector after the program has
started.
Loading or removing the garment.
You can stop the tumble dryer after starting a
program by opening the door. Load more garment
or take out the items you want, close the door,
and press the Start button. A new estimate of the
remaining program time will be displayed after a
few minutes.
6
Drying program finished
The text "END" appears on the display
when the program is finished.
NOTE!
• Clean the lint filter after each load.
WARNING!
If the lint filter becomes clogged, the machine's
automatic overheating cut-off may be triggered.
In order to be able to restart the machine, you
must clean the filter and allow the machine to
cool down for around 30 minutes.
Cleaning the lint filter
1. Grasp the filter handle and pull it toward you.
2. Pull the filter out of its holder.
3. Open the filter and remove the lint by hand.
4. Fold the filter up and insert it into its holder.
The filter may need to be cleaned if it has
limescale deposits. See the "Care and cleaning"
chapter.
To install the automatic drain hose, please see
the section titled Installation
7
Once drying has finished
Turn off the main power switch. Remove
the clothes and close the door to prevent
small children from climbing into the machine.
Customer Care Center
1-800-898-1879
www.askousa.com
11
Advertisement
Table of Contents
