Table of Contents
Advertisement
Tumble drying
Press the Start button
5
Remaining drying time
An estimate of the remaining drying time
will be shown on the display a few minutes after
the drying programme starts. For example, 1:35
means that it will take approximately 1 hour and
35 minutes for the load to dry.
The actual remaining time may be longer than
the estimated time shown on the display. The
remaining time is then shown as 0:15 until the
load is suffi ciently dry.
You can stop the tumble dryer by pressing the
Stop button or by opening the door. In both
cases the programme is stopped and starts
from the beginning if restarted.
NOTE!
The programme will not be aff ected if you
change the programme selector after the
programme has started.
Drying programme fi nished
6
The text Done appears on the display
when the programme is fi nished.
Backlighting
Two minutes after the drying programme
fi nishes the backlighting on the display and
option buttons enters energy saving mode.
NOTE!
• Clean the lint fi lter after each load.
WARNING!
If the lint fi lter becomes clogged, the machine's
automatic overheating cut-out may be triggered.
Clean the fi lter, wait until the machine has
cooled then try starting it. If it still does not start:
Call the service division.
Once drying has fi nished
Turn off the main power switch. Remove the
clothes and close the door to prevent small
children from climbing into the machine.
11
Advertisement
Table of Contents
