Adjusting The Feet - Asko TDC111VACS Operating Instructions Manual

User manual 8090338 asko tdc 111 vacs-en

Hide thumbs

Table Of Contents

Table of Contents

Installation instructions

How to assemble the stacking kit:

1. Undo the anti-tip device.

2. Remove the two screws indicated on the back

of the cleaning machine.

3. Secure the anti-tip device using the screws as

shown in the picture.

4. Attach the plastic cups for mounting the tumble

dryer's front feet to the cleaning machine's top

cover. This is essential, as only when the

tumble dryer's feet are resting in the plastic

cups can you be sure that the dryer is correctly

positioned on the cleaning machine.

Break off tab A on the cup fitted on the right

side and tab B on the cup fitted on the left side.

Then remove the paper from the self-adhesive

surface under the plastic cups.

5. Fit the plastic cups so that the "tags" marked

with arrows are against the front edge or side

edge of the cover and press them firmly onto

the cover. Then break off the remaining tabs.

6. Push out the knock-out hole on the back of the

dryer (you don't have to completely remove

the knockout, just fold it up far enough for the

stacking bracket to fit inside the slot) using a

hammer and screwdriver.

7. Push the tumble dryer in under the metal

brackets. At the same time, keep the front edge

raised by 0,4" (10mm) to 0,8" (20mm).

8. Lower the tumble dryer's front feet into the

plastic cups and adjust the dryer to ensure that

it is balanced.