Belt Clip & Optional Headset - AT&T E2801 User Manual

2.4 ghz cordless telephone with caller id/call waiting

Hide thumbs Also See for E2801:

Table of Contents

Getting started

Belt clip & optional headset

Install belt clip as shown (optional).

Snap belt clip

into the notches

on both sides of

handset.

For hands-free telephone conversations, use any industry standard 2.5 mm head-

set (purchased separately). For best results, use an AT&T 2.5 mm head-

To order an AT&T 2.5 mm headset, visit our website at

set.

www.telephones.att.com or call 1 (800) 222-3111. In Canada

dial 1 (866) 288-4268.

Plug 2.5 mm headset

into the jack on the side

of handset (beneath

small rubber flap).

To release belt clip

from handset, lift one

side of the belt clip

out of the notch first

before detaching the

whole belt clip from

handset.

NOTE: If the sound

quality of the head-

set is poor, try

unplugging it, and

firmly plugging it in

again.

Table of Contents