Last Number Redial; Handset Locator - AT&T E2801 User Manual

REDIAL
555-1234
RINGER MUTE
Telephone operation
Basic operation

Last number redial

Press REDIAL/
PAUSE
dialed numbers (up to 32 digits). Press
or
DIR /VOLUME+
recently called numbers. The handset beeps twice at
the beginning or end of the list. Press
to exit. Press
redial any displayed number. Or press
then REDIAL/
PAUSE
number (up to 32 digits).
Press DELETE to delete the displayed number from
the redial memory.
Temporary ring silencing
Press OFF/
CLEAR
is ringing to silence the ringer temporarily. This
will silence the ringer without disconnecting the
call.
The next incoming call will ring normally.

Handset locator

If the handset is misplaced, press
on the telephone base. The handset will play a paging
tone for 60 seconds to help you locate the handset. To
stop the paging tone, press PHONE/
or any dial pad key (0-9, *, or #) on any of the handset,
or press HANDSET LOCATOR on the telephone base.
NOTES:
1. If the handset ringer is set to off (0), handset will not gen-
erate paging tone.
2. During a page, if you press During a page, if you press
handset (see this page above), the ringer of the handset
will be silenced, but it will not cancel the page.
12
to display the most recently
repeatedly to view up to five
PHONE/
FLASH
to dial the most recently dialed
or MUTE while the telephone
OFF/
CLEAR
CID/-VOLUME
OFF/
CLEAR
SPEAKER to
or
PHONE/
FLASH
HANDSET LOCATOR
SPEAKER,
,
FLASH
or MUTE on the