REV.-A
3.2.5.1 Removing the PLATEN ASSEMBLY
[STEP 1]
Remove the PAPER GUIDE ASSEMBLY, top cover, front cover, paper eject cover and tractor unit.
(See Section 3.2.1.)
[STEP 21
Remove the PANEL UNIT. (See Section 3.2.2.) -
Remove the HOUSING ASSEMBLY, UPPER. (See Section 3.2.4.)
[STEP 31
[STEP 4]
Remove the two CBS (M3X8) screws securing the COVER, PLATEN.
Disengage the teeth of the PLATEN SHAFT HOLDERS and rotate them.
[STEP 51
Remove the PLATEN KNOB.
[STEP 61
[STEP 7]
Slide the PLATEN ASSEMBLY and remove it.
PLATEN KNOB
Figure 3-8. Removing the PLATEN ASSEMBLY
3-1o
C B S
,
,
.
=