Figure 5-3. System Meters Screen (Typical For Powerware 9315 300 480/480V Ups) - Eaton Powerware 9315 Operation Manual

Figure 5-3 shows the LCD screen as it appears when you first start the UPS. The Meters
menu is displayed in the menu box, with the System option highlighted. In the information
area, the system meters show their current readings.
System Normal
Alarm:
Notice: None
Meters

Figure 5-3. System Meters Screen (Typical for Powerware 9315 300 480/480V UPS)

The Input area shows the phase-to-phase voltage, frequency, and phase current of the
incoming utility, followed by the kVA, KW, and power factor measurements. The output
area shows the same information for the power being output by the UPS.
The Bypass area shows the phase-to-phase voltage of the bypass source. The Battery area
displays the DC voltage (V) and the DC current (I).
Select Load Amps from the Meters menu to see a real-time bar graph of the output
current of the UPS. The graph shows the current for each phase.
Figure 5-4 shows the Load Amps Meters screen.
EATON Powerware 9315 UPS (200–300 kVA) Operation Manual S 164201036 Rev F powerware.com
®
Graphics - Displays a real-time graphic representation of the flow of current through
the internal UPS components.
Setup - Allows you to configure the UPS communication port and set the date and time
for the timestamp.
None
Battery
Percent
100%
VAB
480
Meters
System
Load Amps
Events Statistics Graphics Setup
Uninterruptible Power System
Input
VBC VCA FREQ
480 480 60.0
IA IB IC
480 480 480
KVA KW PF
399 379 0.95
Bypass
VAB VBC VCA
480 480 480
Using the Monitor Panel
04 MAY 1997 14:23:45
Output
VAB VBC VCA FREQ
480 480 480 60.0
IA IB IC IN
361 361 361 000
KVA KW PF
300 240 0.80
Battery
V I
540 000
5-5