HP 8100 - Elite Convertible Minitower PC Maintenance And Service Manual page 52

5. Replace the front bezel.
6. Install the screw through the interior of the front of the chassis into the front bezel. The screw
hole is located on the left edge of the chassis next to the top hard drive bay.
Figure 6-10
7. Replace the access panel.
8. Reconnect the power cord and turn on the computer.
9. Lock any security devices that were disengaged when the access panel was removed.
42 Chapter 6 Removal and Replacement Procedures Convertible Minitower (CMT) Chassis
Installing the Front Bezel Security Screw