Fixed Front Bezel - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual
For use with pentium ii xeon and pentium iii xeon processor-based servers only
Hide thumbs
Also See for 5500R - ProLiant - 256 MB RAM:
- Setup and installation manual (169 pages) ,
- Integration notes (29 pages) ,
- Configuration manual (9 pages)
Table of Contents
Advertisement
2-8 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide
Fixed Front Bezel
To remove the fixed front bezel:
1. Perform the preparation procedures. See "Preparation Procedures" earlier in this chapter.
2. Remove the front bezel door (tower model only).
3. Remove the seven T-15 screws securing the fixed front bezel to the chassis.
4. Pull the fixed front bezel away from the chassis.
Figure 2-3. Removing the fixed front bezel
Reverse steps 1 through 4 to replace the fixed front bezel.
For use with Pentium II and Pentium III Xeon processor-based servers only
Advertisement
Table of Contents
