Symbols In Equipment - Compaq 5500R - ProLiant - 256 MB RAM Maintenance And Service Manual

2-2 Compaq ProLiant 5500 and 5500R Maintenance and Service Guide

Symbols in Equipment

CLASS 1 LASER PRODUCT
WARNING: Any surface or area of the equipment marked with these symbols
indicates the presence of a hot surface or hot component. If this surface is
contacted, the potential for injury exists. To reduce risk of injury from a hot
component, allow the surface to cool before touching.
WARNING: Any surface or area of the equipment marked with these symbols
indicates the presence of electrical shock hazards. The enclosed area contains
no operator serviceable parts. To reduce the risk of injury from electrical shock
hazards, do not open this enclosure.
WARNING: Any RJ-45 receptacle marked with these symbols indicates a
Network Interface Connection. To reduce the risk of electrical shock, fire, or
damage to the equipment, do not plug telephone or telecommunications
connectors into this receptacle.
WARNING: This label or its equivalent is located on the surface of your CD-ROM
drive. This label indicates that the product is classified as a CLASS 1 LASER
PRODUCT.
WARNING: Power supplies or systems marked with these symbols indicate the
equipment is supplied by multiple sources of power. To reduce the risk of injury
from electrical shock, remove all power cords to completely disconnect power
from the system.
For use with Pentium II and Pentium III Xeon processor-based servers only