Installing Print Driver On Computers Running Windows; Identifying Print Driver Pre-Install Status (For Network Connection Setup) - Epson AcuLaser C1750N User Manual

1. Click start — All Programs — EPSON — EPSON Printer Software — EPSON AL-C1750N /
EPSON AL-C1750W — Printer Setting Utility.
Note:
The Select Printer window appears in this step, when multiple print drivers are installed on your
computer. In this case, click the name of the desired printer listed in Printer Name.
The Printer Setting Utility appears.
2. Click the Printer Settings Report tab.
3. Select Information Pages from the list at the left side of the page.
The Information Pages page is displayed.
4. Click the Printer Settings button.
The Printer Settings page is printed.
If the IP address is 0.0.0.0 (the factory default) or 169.254.xx.xx, an IP address has not been
assigned.
See Also:
"Assigning an IP Address (for IPv4 Mode)" on page 30

Installing Print Driver on Computers Running Windows

Identifying Print Driver Pre-install Status (for Network Connection Setup)

Before installing the print driver on your computer, print the Printer Settings page to check the IP
address of your printer.
The following procedure uses Windows XP as an example.
The Operator Panel
1. Press the (Menu) button.
2. Select Information Pgs, and then press the
Epson AcuLaser C1750 Series
button.
User's Guide
Network Basics 34