Usb Connection Setup - Epson AcuLaser C1750N User Manual

❏ Windows Server 2008 R2
❏ Windows Server 2008
❏ Windows XP
The following procedure uses Windows XP as an example.
1. Click start — Help and Support.
Note:
For Windows Vista, Windows Server 2008, Windows Server 2008 R2 and Windows 7 operating
systems, if you use Online Help, switch to Offline Help on Windows Help and Support window.
2. In the Search box, enter firewall and then press the Enter key.
In the list, click Turn Windows Firewall on or off and then follow the instructions on the screen.
Enable the firewall after the installation of the Epson printer software is complete.

USB Connection Setup

The following procedure uses Windows XP as an example.
When the Printer is Connected to Computer With a USB Cable
1. Insert the Software Disc into your computer's CD/DVD drive.
Note:
If the Software Disc does not automatically launch, click Start (start for Windows XP) — All
Programs (for Windows Vista and Windows 7) — Accessories (for Windows Vista and Windows
7) — Run, and then enter D:\setup.exe (where D is the drive letter of your computer), and then click
OK.
2. Turn on the printer.
Note:
If Found New Hardware Wizard appears, click Cancel at this time.
3. Click Easy Install.
The SOFTWARE LICENSE AGREEMENT appears.
Epson AcuLaser C1750 Series
Network Basics
User's Guide
36