Epson AcuLaser C1750N User Manual page 127

When you select a new setting from the operator panel, an asterisk appears next to the setting to
identify it as the current user default menu setting.
These settings are active until new ones are selected or the factory defaults are restored.
To select a new value as a setting:
1. Press the (Menu) button.
2. Select Admin Menu, and then press the
3. Select the desired menu, and then press the
4. Select the desired menu or menu item, and then press the
❏ If the selection is a menu, the menu is opened and the first menu item in the menu appears.
❏ If the selection is a menu item, the default menu setting for the menu item appears.
Each menu item has a list of values for the menu item. A value can be:
❏ A phrase or word to describe a setting
❏ A numerical value that can be changed
❏ An On or Off setting
Note:
Press the and button at the same time. This will display the factory default menu settings.
5. Select the desired value.
6. Press the button.
This enables the setting value, which is indicated by an asterisk (*) next to the setting value.
7. Press the (Back) or
To continue setting other items, select the desired menu. To quit setting new values, press the
(Menu) button to return to the main screen.
Driver settings may have precedence over changes previously made. In such case, change the defaults
of the operator panel.
button.
button.
button to return to the previous menu.
Epson AcuLaser C1750 Series
button.
Printing Basics
User's Guide
127