Setting The Ip Address; Tcp/Ip And Ip Addresses; Automatically Setting The Printer's Ip Address; Dynamic Methods Of Setting The Printer's Ip Address - Epson AcuLaser C1750N User Manual

Aculaser c1750 series
Hide thumbs Also See for AcuLaser C1750N:
Table of Contents

Advertisement

Setting the IP Address

TCP/IP and IP Addresses

If your computer is on a large network, contact your network administrator for the appropriate TCP/
IP addresses and additional system settings information.
If you are creating your own small Local Area Network or connecting the printer directly to your
computer using Ethernet, follow the procedure for automatically setting the printer's IP address.
Computers and printers primarily use TCP/IP protocols to communicate over an Ethernet network.
With TCP/IP protocols, each printer and computer must have a unique IP address. It is important that
the addresses are similar, but not the same; only the last digit needs to be different. For example, your
printer can have the address 192.168.1.2 while your computer has the address 192.168.1.3. Another
device can have the address 192.168.1.4.
Many networks have a Dynamic Host Configuration Protocol (DHCP) server. A DHCP server
automatically programs an IP address into every computer and printer on the network that is
configured to use DHCP. A DHCP server is built into most cable and Digital Subscriber Line (DSL)
routers. If you use a cable or DSL router, see your router's documentation for information on IP
addressing.

Automatically Setting the Printer's IP Address

If the printer is connected to a small established TCP/IP network without a DHCP server, use the
installer on the Software Disc to detect or assign an IP address to your printer. For further instructions,
insert the Software Disc into your computer's CD/DVD drive. After the Installer launches, follow the
prompts for installation.
Note:
For the automatic installer to function, the printer must be connected to an established TCP/IP network.

Dynamic Methods of Setting the Printer's IP Address

There are two protocols available for dynamically setting the printer's IP address:
❏ DHCP (enabled by default)
❏ AutoIP
Epson AcuLaser C1750 Series
Network Basics
User's Guide
28

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aculaser c1750wAculaser c1750

Table of Contents