Preventing Paper Jams; Reprinting After A Paper Jam (For Windows Only) - Epson WorkForce Pro WP-M4015 User Manual

User's Guide

Preventing paper jams

If your paper jams frequently, check the following.
❏ The paper is smooth, not curled or wrinkled.
❏ You are using high-quality paper.
❏ The printable side of the paper is face down in the paper cassette.
❏ The printable side of the paper is face up in the rear MP tray.
❏ The paper stack was fanned before loading.
❏ For plain paper, do not load paper above the line just under the H or c arrow mark inside the edge guide.
For Epson special media, make sure the number of sheets is less than the limit specified for the media.
"Selecting which tray to use and its loading capacities" on page 16
&
❏ The edge guides are snug against the edges of the paper.
❏ The printer is on a flat, stable surface that extends beyond the base in all directions. The printer will not operate
properly if it is tilted.

Reprinting after a paper jam (for Windows only)

After you cancel the print job because of a paper jam, you can reprint it without reprinting pages that have already been
printed.
A
Solve the paper jam.
"The Paper Jams" on page 80
&
B
Access the printer settings.
"Accessing the printer driver for Windows" on page 25
&
C
Select the Print Preview check box in the Main window of your printer driver.
D
Make the settings that you want to use to print.
E
Click OK to close the printer settings window, and then print your file. Print Preview window opens.
F
Select a page that has already been printed in the page list box on the left side, and then select Remove Page from
the Print Options menu. Repeat this step for all the pages that have already been printed.
G
Click Print on the Print Preview window.
Troubleshooting for Printing
83