Colors In Printed Images Are Uneven - Canon imagePROGRAF iPF820 User Manual

Colors in printed images are uneven

Line Drawing/Text is selected when printing images
in many solid colors.
You are printing on paper that curls easily.
Printed colors may be uneven if you set the Print
Quality too low.
Color may be uneven between dark and light image
areas.
When borderless printing is used, the edge of the
paper is cut during printing. Thus, ink density may
be uneven at the edges.
The Printhead is out of alignment.
Drying documents stacked on each other may cause
uneven colors.
Color density may be uneven if you use Glossy
Paper, art paper, or Coated Paper.
The type of paper specied in the printer driver does
not match the type loaded in the printer.
Cause
Problems with the printing quality
Corrective Action
Specify Image in the printer driver.
Printed colors may appear uneven on the leading
edge of paper that is susceptible to curling. Increase
the level of vacuum holding the paper against the
Platen or specify a margin of 20 mm (0.79 in.) or
more for the leading edge.
(→P.561)
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
Printing in Draft or Standard mode is faster and
consumes less ink than in Highest or High modes,
but the printing quality is lower.
(→P.211)
Select Unidirectional Printing in the Advanced
Settings of the printer driver.
Specify No in Auto Cut in the printer driver before
printing. In this case, the paper can be printed without
borders on the left and right sides only. Cut the
printed document ejected from the printer, then use
scissors to cut away the edges on the top and bottom.
Choose a higher level of Print Quality in the
Advanced Settings of the printer driver.
(→P.211)
Adjust the Printhead alignment.
(→P.544)
To avoid uneven colors, we recommend drying each
sheet separately.
In Advanced Settings of the printer driver, choose
Highest or High in Print Quality.
Load paper of the same type as you have specied
in the printer driver.
(→P.118)
(→P.150)
Make sure the same type of paper is specied in the
printer driver as you have loaded in the printer.
1.
Hold down the Stop button for a second or more
to cancel printing.
2.
Change the type of paper in the printer driver and
try printing again.
Troubleshooting 627