Printer Parts
Printer parts
Front
a. Top Cover
Open this cover to install the Printhead, load paper, and remove any jammed paper from inside the
printer as needed. (→P.16)
b. Ejection Guide
Guides printed documents as they are ejected. Open this guide when loading a roll.
c. Roll Holder Slot
Slide the Roll Holder into this slot.
d. Roll Holder
Load the roll on this holder.
e. Protective Cloth for Sheets
A cloth tray that catches ejected sheets.
f. Paper Feed Slot
When loading a roll, insert the edge of the roll paper here. You can load rolls in two positions, on the
printer side in the Roll 1 (Upper) position and on the roll unit side in the Roll 2 (Lower) position.
g. Holder Stopper
Secure rolls on the Roll Holder with this part.
h. Ink Tank Cover
Open this cover to replace an Ink Tank. (→P.19)
i. Control Panel
Use this panel to operate the printer and check the printer status. (→P.21)
Printer parts
Printer Parts 13