Mac OS Configuration
Setting basic functions
On the [System] tab, you can set basic functions required to use the printer. The
printer can be used on factory-set defaults, but the configuration can be changed
depending on the condition of the user. The changed condition holds even if the
printer is turned off.
The access code can be changed on this tab.
Making network-related settings
On the [Network 1], [Network 2] and [Network 3] tabs, you can set configurations
about network connection and communication.
The following operations are possible on these tabs:
• Checking the device name, active protocol, and other printer information
• Making interface settings, including the timeout setting and protocol settings
• Checking or making TCP/IP settings
• Checking or making IPX and SMTP settings
• Checking or making SNMP and AppleTalk settings
Settings conditions for printing
On the [Printer:] tab, you can set conditions for printing.
In the [PCL] area, you can specify the conditions such as Orientation and font set-
tings.
8
In the [PS] area, you can specify Resolution and Color Profile.
90