Ricoh C222DN - Aficio SP Color Laser Printer Software Manual page 13

D
In the [MAC Address] box, enter the printer's MAC address that was printed
on the test page. Then, in the [IP Address] box, enter the IP address you want
to set for the printer.
Enter the subnet mask and gateway address if necessary.
E
Click [OK].
A confirmation message appears.
F
Click [OK].
G
Click [Close] to close the Smart Organizing Monitor dialog box.
Installing the printer driver
Use the following procedure to install the printer driver.
A
On the [Printer Drivers and Utilities] dialog box, click [PCL 6 Printer Driver].
If you have already closed the [Printer Drivers and Utilities] dialog box, launch
"Setup.exe" from the CD-ROM root directory.
The software license agreement appears.
B
After reading the agreement, click [I accept the agreement.], and then click
[Next >].
C
In the dialog box that appears, click [Add a new printer], select the [Search for
network printers.] check box, and then click [Next >].
If the search fails, the printer driver is installed via port LPT1.
Check the port settings and printer's IP address again, before reconfiguring
the settings.
D
When the list of found printers appears, click this printer (whose IP ad-
dress you specified before the installation), and then click [Next >].
E
Double-click the printer name to display the printer's settings, change the
settings as required, and then click [Continue].
F
If a message appears informing you that the installation was successfully
completed, click [Finish].
Installing the Printer Driver in a Network Environment
1
5