Ricoh C222DN - Aficio SP Color Laser Printer Software Manual page 67

Changing the paper settings
On the [Paper Input] tab, you can change paper size and other paper settings.
• Tray 1: Size
The following sizes are available:
A4 (210 x 297 mm), B5 JIS (182 x 257 mm), A5 (148 x 210 mm), B6 JIS (128 x 182
mm), A6 (105 x 148 mm), 8 1/2 x 14, 8 1/2 x 11, 5 1/2 x 8 1/2, 7 1/4 x 10 1/2,
8 x 13, 8 1/2 x 13, 8 1/4 x 13, 4 1/8 x 9 1/2, 3 7/8 x 7 1/2, C5 Env, C6 Env, DL
Env, 16K, Custom Paper Size, Any Size
• Tray 1: Type
The following paper types are available:
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Thick Paper 1, Bond Paper, Card-
stock, Labels, Envelope, Any Type
• Custom Paper Size
You can make the custom paper size settings, when [Custom Paper Size] is se-
lected.
• Unit:
Specify the unit of measurement in "mm" or "inch".
• Horizontal:
Specify the horizontal width between 90 and 216 mm (3.54 and 8.50 inch).
• Vertical:
Specify the vertical length between 148 and 356 mm (5.83 and 14.02 inch).
• Tray 2: Size
You can specify the paper size for tray 2.
The following sizes are available:
A4 (210 x 297 mm), 8 1/2 x 11
• Tray 2: Type
You can specify the paper type for tray 2.
The following paper types are available:
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letter-
head, Preprinted Paper, Prepunched Paper
• Tray Priority
Select the priority tray from the [Default Tray:] list, when the optional paper
feed unit is attached to the printer.
Note
❒ The paper settings are not available for the bypass tray.
❒ Tray 2 is available only when the optional paper feed unit is attached to the
printer.
Using Smart Organizing Monitor
5
59