Ricoh C222DN - Aficio SP Color Laser Printer Software Manual page 68

Monitoring and Configuring the Printer
Adjusting registrations
On the [Maintenance] tab, you can adjust color registration and print starting po-
sitions.
Normally, you do not have to adjust registrations. However, adjustments could
be useful in some cases, especially when you want to print in a specific position.
Under [Registration: Tray 2 Paper] and [Registration: Bypass Tray], you can adjust the
print image position printed on the sheet fed from each tray. To check the adjust-
ment result, use [Print Test Sheet].
Also, you can updated the firmware by clicking [Printer Firmware Update].
The latest version of the firmware can be downloaded form the supplier's web-
site.
Setting basic functions
On the [System] tab, you can set basic functions required to use the printer. The
5
printer can be used on factory-set defaults, but the configuration can be changed
depending on the condition of the user. The changed condition holds even if the
printer is turned off.
The access code can be changed on this tab.
Making network-related settings
On the [Network 1], [Network 2] and [Network 3] tabs, you can set configurations
about network connection and communication.
The following operations are possible on these tabs:
• Checking the machine name, active protocol, and other printer information
• Making interface settings, including the timeout setting and protocol settings
• Checking or making TCP/IP settings
• Checking or making IPX and SMTP settings
• Checking or making SNMP and AppleTalk settings
Settings conditions for printing
On the [Printer] tab, you can set conditions for printing.
In the [PCL] area, you can specify the conditions such as Orientation and font set-
tings.
In the [PS] area, you can specify Resolution and Color Profile.
60