Ricoh C222DN - Aficio SP Color Laser Printer Software Manual page 97

• Tray 1: Type
The following paper types are available:
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letter-
head, Preprinted Paper, Prepunched Paper, Labels, Bond Paper, Cardstock,
Thick Paper 1, Envelope, Any Type
• Custom Paper Size
You can make the custom paper size settings, when [Custom Paper Size] is se-
lected.
• Unit:
Specify the unit of measurement in "mm" or "inch".
• Horizontal:
Specify the horizontal width between 90 and 216 mm.
• Vertical:
Specify the vertical length between 148 and 356 mm.
• Tray 2: Size
The following sizes are available:
A4 (210 x 297 mm), 8 1/2 x 11
• Tray 2: Type
The following paper types are available:
Thin Paper, Plain Paper 1, Plain Paper 2, Recycled Paper, Color Paper, Letter-
head, Preprinted Paper, Prepunched Paper
Note
❒ Tray 2 is available only when the optional paper feed unit is attached to the
printer
Adjusting registration
On the [Maintenance] tab, you can adjust color registration and print starting po-
sitions.
Normally, you do not have to adjust registration. However, adjustment can be
useful in some cases, especially if you want to print in a specific position. Under
[Registration: Tray 2 Paper] and [Registration: Bypass Tray], you can adjust the print
image position printed on the sheet fed from each tray. To check the adjustment
result, use [Print Test Sheet].
Also, you can updated the firmware by clicking [Printer Firmware Update].
The latest version of the firmware can be downloaded form the supplier's web-
site.
Using Smart Organizing Monitor
8
89