Driver Pcb Assy - Brother HL-1070 - B/W Laser Printer Service Manual

Note: See the Fig. 3.26 about the position installing the dumping material and the
soundproof sponge A, B.
<The inside of the base plate>
Dumping material
3.12

Driver PCB ASSY

(1) Remove the screw securing the driver PCB ASSY. (Slide the PCB A from
underneath the main shield.)
Screw
Driver PCB ASSY
Insulation tape
<The outside of the base plate>
Soundproof
Soundproof
sponge A
sponge B
Fig. 3.26
A
Fig. 3.27
III-16
Soundproof
sponge A
Main Shield
Driver PCB ASSY