Loading Paper Into The Feeder - Brother HL-1070 - B/W Laser Printer Service Manual

Loading Paper into the Feeder

To load paper into the feeder, follow these steps.
Note
This section describes loading paper into the front multi-purpose sheet
feeder 1. Load paper into the rear sheet feeder 2 in the same way as
described here. Remember, however, that paper sizes vary for Feeder 1
and Feeder 2. For paper sizes, see
Chapter 2.
1. Open the multi-purpose sheet feeder by gently pulling the tabs
forward towards you. (
2. Move the paper guides horizontally to the widest position. (
Fig.2-4 Opening the Feeder and Moving the Paper Guides
3. Load paper into the multi-purpose sheet feeder with the printing
surface face down.
Fig. 2-5 Loading Paper or Envelopes in the Feeder
"PAPER SPECIFICATIONS"
)
PULL
HERE TO
INSERT PAPER
2–5
CHAPTER 2 PAPER HANDLING
in
)