Brother HL-1070 - B/W Laser Printer Service Manual page 137

5
6
PULL
HERE TO
INSERT PAPER
7
NOTE
You can remove and install the front feeder 1 to clear paper jams as shown in the illustrations
below. For more information, see
1. Remove Feeder 1.
Pushing and sliding the tabs, move the
paper guides to fit the paper width.
CAUTION
Failure to set the paper guide to the paper
width may cause paper skew and jams.
Close the cover of the multi-purpose sheet
feeder 1.
Open the output tray. (
Extend the extension support wire (
set the paper stopper (
CAUTION
Use the paper stopper only when printing
A4 or Letter size paper.
Failure to set the paper stopper may cause
output stack sheets to scatter.
"PAPER JAMS" in Chapter 6 of the User's
2. Install Feeder 1.
- 7 -
)
) and
).
Guide.