Brother HL-1070 - B/W Laser Printer Service Manual page 143

Printing a Test Sample Page
We recommend that you print a test page. Refer to the instructions below.
NOTE
The following first-print test page operation will be invalid after the printer receives any
data from your computer.
Additional test sample pages can be printed by using the
Chapter 3 of the User's Guide.
NOTE
If the printer does not print a test sample page,
Q & A" of the User's Guide. If you are still unable to print a test sample page after reviewing
the information in the User's Guide, consult your dealer.
After printing the test sample page, you are ready to prepare your computer to work with the
printer. The software setup varies depending upon your computer and operating system. Refer
to the section relevant to your needs:
Action 6-1: Installation from CD-ROM
Action 6-2: Prepare Windows 95/98 for the Printer
Action 6-3: Prepare Windows 3.1 for the Printer
Action 6-4: Prepare DOS for the Printer
Action 6-5: Prepare Macintosh for the Printer
"Test Print Mode"
Press the control panel switch.
The printer will start printing a test sample
page.
NOTE
The printer can also print settings, fonts,
and hexadecimal values of received data.
For more information, see
Mode" in Chapter 3 of the User's Guide.
see "CHAPTER 6 TROUBLESHOOTING,
- 13 -
procedure in
"Test Print