Fixing Unit - Brother HL-1070 - B/W Laser Printer Service Manual

3.8

Fixing Unit

(1) Remove the two screws.
(2) Lifting the fixing unit, disconnect the two heater harnesses and the thermistor
connector on the EL PCB.
Screws
Thermistor connector
(3) Unhook the harness of the thermistor ASSY from the hook of the fixing unit.
(4) Remove the screw.
(5) Remove the thermistor ASSY.
(6) Remove the cleaner ASSY.
Fixing Unit
Heater harness (White)
Fig. 3.15
Fixing Unit
Hook
Cleaner ASSY
Fig. 3.16
III-10
Screws
EL PCB
Thermistor harness
Cup B tight M3x14
Thermistor ASSY