Dell Inspiron 2650 User Manual page 18

Solving Problems: Dell Inspiron 2600 and 2650
If the message is not listed, see the documentation for the operating system or the
program that was running at the time the message appeared.
Decreasing available memory —
improperly seated. If your computer has 192 MB or more of RAM, reseat
the memory modules and, if necessary, replace it. If your computer has
less than 192 MB of RAM, you do not need to reseat the module.
To check how many MB of RAM your computer has:
In Windows XP, click Computer Information.
In Windows 2000, right-click the My Computer icon on your desktop,
and then click the General tab.
The file being copied is too large for the destination drive —
that you are trying to copy is too large to fit on the disk, or the disk is too
full. Try copying the file to a different disk or use a larger capacity disk.
Insert bootable media —
nonbootable floppy disk or CD. Insert a bootable floppy disk or CD.
Non-system disk or disk error —
Remove the floppy disk and restart the computer.
Operating system not found —
(see "Contacting Dell" in the Dell Owner's Manual that came with your
computer).
A required .DLL file was not found —
open is missing an essential file. Remove and then reinstall the program.
Microsoft® Windows® XP
1. Click the Start button.
2. Click Control Panel.
3. Click Add or Remove Programs.
4. Select the program you want to remove.
5. Click the Change or Remove Program icon.
6. See the program documentation for installation instructions.
Windows 2000
1. Click the Start button, point to Settings, and then click Control
Panel.
file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/solving.htm (4 of 22) [2/28/2004 6:52:01 AM]
Your memory module may be faulty or
The operating system is trying to boot to a
A floppy disk is in the floppy drive.
Contact Dell for technical assistance
The program that you are trying to
The file