Dell Inspiron 2650 User Manual page 146

EMI Shield, Video Card, and Palm Rest: Dell Inspiron 2600 and 2650
Palm Rest
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the keyboard.
NOTICE: You must remove the display assembly before you remove the palm rest; the
display hinges pass through the back of the palm rest.
2. Remove the display
3. Remove the EMI
4. Remove the video
5. Remove the two M2.5 x 5-mm screws from the top of the palm rest.
file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/palmrest.htm (9 of 11) [2/28/2004 6:52:45 AM]
"Preparing to Work Inside the
assembly.
shield.
card.
Computer" before performing the following