NOTICE:
Disconnect the computer and attached devices from electrical outlets,
and remove any installed battery.
NOTICE:
Ensure that you disconnect the flex cable from the ZIF connector
before you remove the floppy drive from the computer. See
instructions.
2. Remove the two M2.5 x 5-mm screws from the floppy drive, and partially pull
the drive out of the computer.
1 M2.5 x 5-mm screws (2)
2 ZIF connector
4 flex cable
file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/upgrades.htm (14 of 18) [2/28/2004 6:52:41 AM]
step 3
for further