Dell Inspiron 2650 User Manual page 133

Display Assembly and Display Latch: Dell Inspiron 2600 and 2650
4 display panel
5 M2.5 x 5-mm screws
(2)
Removing the 15-Inch Display Panel
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the keyboard.
2. Remove the display
3. Remove the display
4. Remove the four M2 x 3-mm screws on the left side of the display panel.
5. Remove the four M2 x 3-mm screws on the right side of the display panel.
6. Remove the M2.5 x 5-mm screw that secures the display-feed flex cable to the display
assembly.
7. Unsnap the flex-cable retention bracket from the top cover, and lift the bracket out of the
display assembly.
file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/display.htm (10 of 14) [2/28/2004 6:52:43 AM]
9 flex-cable retention
bracket
10 top cover
"Preparing to Work Inside the
assembly.
bezel.
Computer" before performing the following