Dell Inspiron 2650 User Manual page 143

EMI Shield, Video Card, and Palm Rest: Dell Inspiron 2600 and 2650
NOTICE: Disconnect the computer and any attached devices from electrical outlets, and
remove any installed battery.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by touching
an unpainted metal surface on the computer.
NOTICE: Read
procedure.
1. Remove the keyboard.
2. Remove the EMI
3. Remove the M2.5 x 8-mm screw that secures the video card to the system board.
4. Pull the video card by the pull tab toward the front of the computer to remove the video
card from the bottom case.
1 video card
2 M2.5 x 8-mm screw (1)
3 pull tab
file:///F|/Service%20Manuals/Dell/Inspiron/2600-50/palmrest.htm (6 of 11) [2/28/2004 6:52:45 AM]
"Preparing to Work Inside the
shield.
Computer" before performing the following