Table of Contents
Advertisement
Function Key
The Function key is used to select the function or
symbol printed above a key. For example, when
2
you press
, the Font size menu appears in the
display; however, if you press +
Language menu appears.
Backspace Key
The Backspace key removes the character to the
left of the cursor. Pressing
current label text. Text size and other settings
remain unchanged.
Escape Key
The Escape key returns you to the starting point
from within any function.
Navigation Key
You review and edit your label using the arrows on
the Navigation key. You can also view menu
choices, and then press
Designing Your Label
You can choose from a number of formatting
options to enhance the appearance of your labels.
Changing the Font Size
You can print the text on your label in five font
sizes: extra-small, small, medium, large, and extra-
large.
XS S M L XL
The font size you can use depends on the
size of label tape that is installed in the printer.
6
6
Manual_RhinoPRO5000_WEU.indd 6
2
together, the
0
+
clears all the
0
to make a selection.
To set the font size
2
1. Press
.
2. Select a font size and press
Creating Multi-Line Labels
You can create multi-line labels depending upon
the size of the label tape, as follows:
6 mm
9 mm
Tape Size
(1/4")
(3/8")
Number
1
of Lines
To create a multi-line label
1. Type the text for the first line, and press
2. Type the text for the next line.
3. Repeat these steps for each additional line.
Adding Symbols
The printer supports the extended symbol set as
shown in Figure 8.
,
(
)
\
~
²
�
�
�
�
�
Figure 8
To add a symbol
1. Press
+
. The first row of symbols
V
shown in Figure 8 is displayed.
2. Use the arrow keys to move to the desired
symbol. You can move horizontally and vertically
through the rows of symbols.
3. When you locate the symbol, press
symbol to your label.
.
12 mm
19 mm
(1/2")
(3/4")
2
2
4
.
;
'
"
°
&
?
�
_
@
±
to add the
23-07-2004 10:51:26
Advertisement
Table of Contents
