c. Repeat step step a and step b to remove the bracket on the opposite side of the
tray assembly.
Figure 10–2: Removing the front bracket
2. Attach long front brackets to the tray assembly:
a. Attach a long front bracket (1) to the tray assembly using the three flat-head
screws, as shown in
b. Attach the captive fastener to the long front bracket (2).
Figure 10–3: Attaching a long front bracket
HAFM server installation guide
Sliding Shelf Installation for HAFM Server
2
Figure
10–3.
1
1
2
10–3
10–3