Web Server Configuration; Ftp Server Configuration - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

8. When prompted with Please insert the Compact Disc labeled
'Service Pack Files' into your CD-ROM drive, click OK.
9. When prompted with Insert Service Pack Files into the drive
selected below, type c:\i386 and click OK.

Web Server Configuration

The Web server is used to download and install the HAFM application to remote
workstations, and to provide access to online help information from the HAFM
application once installed.
Installation of the HAFM software on the server automatically installs the appropriate
Web files to the default Web publishing directory (c:\inetpub\wwwroot), and no
additional Web server configuration is required specifically for HAFM use.

FTP Server Configuration

The FTP server requires the following configuration settings for HAFM to function
properly:
• The FTP server home directory must be located at c:\inetpub\ftproot. This is the
default configuration when IIS is first installed.
• The FTP server must accept anonymous connections. This is the default
configuration when IIS is first installed.
• The FTP server home directory must have both read and write access permissions.
Because the default setting for the home directory is read-only, complete the steps
in "Configuring the FTP Server Home Directory for Read/Write
page 5–4 to enable write permissions in the FTP server home directory.
• A virtual directory must be created to provide FTP read-only access to the HAFM
program files. Complete the steps in
Directory for Read/Write
HAFM server installation guide
Internet Information Server Setup and Configuration
"Configuring the FTP Server Home
Access" on page 5–4 to create the virtual directory.
Access" on
5–3 5–3