Configure The Call-Home Via Dial-Out Feature; Type Of Connection Window - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Configure the Call-Home via Dial-out Feature

The HAFM server has a call-home feature that provides automatic dial-out through
the modem to a service support facility to report Director, Edge Switch, or HAFM
server problems. The problem is logged into the support facility's tracking system for
resolution.
NOTE: These procedural steps are valid only for an initial installation. Several dialog boxes
appearing in this procedure are configured only once per installation.
To configure the call-home feature, complete the following instructions for
Windows 2000:
1. Ensure an analog telephone cable is routed and connected to the modem.
2. Log on to Windows 2000 as Administrator, and then double-click Call-Home
Setup that displays on the Windows desktop to begin the configuration. If this is
the first time call-home setup is attempted, the Network Connection Wizard
dialog box displays, as shown in
Figure 7–13: Type of Connection window
3. Select the Dial-up to private network option, and then click Next. The Phone
Number to Dial window displays, as shown in
HAFM server installation guide
Figure 7–13.
Figure
HAFM Server Configuration
7–14.
7–17 7–17