Ready To Create Your Connection Window - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

6. Select the For all users option, and then click Next.
Figure 7–16: Ready to create your connection window
7. Enter the name of the connection, and then click Finish. The Connect dialog box
displays.
8. Click Dialing Rules. The Phone and Modem Options dialog box displays.
9. Select a location and click Edit. The Edit Location dialog box displays.
10. Click the Calling Card tab, choose None, and then click OK twice to return to
the Connect dialog box.
11. Unless instructed otherwise, leave the default phone number configured, click
Cancel, and go to
NOTE: Do not change any configuration defaults for the Phone book entry.
12. If instructed by the customer to use a different phone number, click Properties.
13. Change only the Area code and Phone number as instructed.
14. Click OK to close the dialog box, and then click Cancel to close the Connect
dialog box.
15. If remote dial-in support is not to be permitted for the installation, go to
Remote
call-home feature, if installed.
HAFM server installation guide
step 15.
Notification" on page 7–22 for instructions on testing the LAN-based
HAFM Server Configuration
"Test
7–19 7–19