Toner Cartridge; Toner Cartridge Replacement - Xerox XC356 - Home Office Copier User Manual

Toner Cartridge

When insufficient toner is detected at the start of copying, the toner
cartridge replacement indicator will light and the copier searches for toner
for up to 1 minute. During this time the document glass will slide back and
forth. If the copier still detects insufficient toner, the indicator will start
flashing. The copier will not operate until the toner cartridge is replaced.
During multiple sheet copying of a dark original, the toner cartridge
replacement indicator may flash and the copier may stop even though
toner remains in the cartridge. If this occurs, turn the power off and on
again, and restart copying.
Note: A few more copies may be made by using the following procedure.
Vigorously shake the cartridge horizontally several times, tap the top of
the cartridge (label side), with your hand then reinsert the cartridge into the
copier.

Toner Cartridge Replacement

22
1. Turn the power off.
2. Press the front cover open button and
open the front cover.
3. Press down on the catch and remove the
toner cartridge.
4. Vigorously shake the new toner cartridge
horizontally several times and then
remove the cover.
•
Return the empty cartridge to Xerox for
recycling.