Connecting A Computer; Using The Pc Setting; Adjusting The Picture Settings; Auto Adjust For Pc - Toshiba 32AV800AZ Owner's Manual

Connecting a computer

An analogue RGB (15 pin) computer cable can be
connected.
Computer
Audio cable for
PC-to-TV
connection
Conversion adapter
(if necessary)
Connect a PC cable from the computer to the
PC terminal on the back of the TV.
For acceptable PC signal formats (
Acceptable PC signals through HDMI terminals).
However, these signal formats are converted to match
the number of pixels of the LCD panel.
Therefore, the TV may not display small text properly.
If you connect this unit to your PC, the compressed
image is displayed in S-XGA mode, therefore the picture
quality may deteriorate and characters may not be read.
Notes:
• Some PC models cannot be connected to this TV.
• There is no need to use an adapter for computers
with DOS/ V compatible mini D-sub 15 pin terminal.
• A bar may appear in the upper, lower, right or left
side of the screen, or parts of the picture may be
obscured depending on some signals. This is not the
malfunction.
• If the edges of the picture are stretched, readjust the
picture position adjustments in the PC of PICTURE
menu.
• Depending on the specification of the PC you are
playing the DVD-Video on, and the DVD's title, some
scenes may be skipped, or you may not be able to
pause during multi-angle scenes.
42
Connecting your TV
TV back view
Mini D-sub
15 pin
RGB PC cable
RGB/
page 43
Signal names for mini D-sub 15 pin connector
Pin assignment for RGB/PC terminal
5
10
15
Pin No. Signal name
1 R
2 G
3 B
4 NC (not connected)
5 NC (not connected)
6 Ground
7 Ground
8 Ground

Using the PC setting

• First, press
to display the video input source list,
then press ▲ or ▼ and
page 28 Input Selection)
mode. (
• This function may not be available for some signal or
if no signal is received.
• The optimum points of the clock phase and sampling
clock adjustments may be incomprehensible
according to the input signals.

Adjusting the picture settings

and use ◄ or ► to select SETUP.
1. Press
2. Use ▲ and ▼ to select PC Setting and press
3. Use ▲ or ▼ to select Horizontal Position, Vertical
Position, Clock Phase, or Sampling Clock and
use ◄ or ► to adjust your preference..

Auto Adjust for PC

Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically. Depending on the
type of the signal, there is a possibility that the display
may not be adjusted in its optimum condition with this
function. In that case, please adjust each item manually.
and use ◄ or ► to select SETUP.
1. Press
2. Use ▲ and ▼ to highlight Auto Adjust and press
.
1
6
11
Pin No. Signal name
9 VGA-5V
10 Ground
NC (not
11
connected)
12 VGA-SDA
13 H-sync
14 V-sync
15 VGA-SCL
to select the PC input
.