Adjusting The Sound; Selecting The Audio Mode; Changing Channel Settings; Automatically Scanning For Channels - Insignia NS-LDVD32Q-10A - 32" LCD TV User Manual

Adjusting the sound

Adjusting the sound
To adjust the sound:
1 Press TV MENU, then press
the Audio icon. The Audio menu appears.
TV mode
Audio
Sound Mode
Treble
Bass
Balance
Digital Audio / SPDIF
Audio Language
Surround Sound
Audio Only
OK
Move
ENTER
Adjust settings to affect sound quality.
VGA mode
Audio
Sound Mode
Treble
Bass
Balance
Digital Audio / SPDIF
Audio Language
Surround Sound
Audio Only
Move OK
ENTER
Adjust settings to affect sound quality.
2 Press to access the Audio menu.
3 Press or to highlight a setting, then press
or to adjust the setting or open a setting
menu. If a another menu opens, press
or to adjust the setting. You can select:
• Sound Mode—You can select Standard,
Music, Theater, News, or Custom.
• Treble—Adjusts the high sounds.
• Bass—Adjusts the low sounds.
• Balance—Adjusts the balance between the
left and right channels.
• Digital Audio/SPDIF—You can select PCM or
RAW.
• Audio Language (Digital TV mode only)—You
can select English, French, or Spanish.
• MTS/SAP (Analog TV mode only)—You can
select Mono, Stereo, or SAP.
• Surround Sound—You can select On or Off.
• Audio Only—You can select On or Off. When
this feature is turned on, the picture
disappears and only the sound plays. To
restore the picture, press any button except
(power).
4 Press TV MENU one or more times to return to
the previous menu.
20
or to highlight
Picture Audio Channel Settings
Music
RAW
English
Off
Off
Select Previous
MENU EXIT
Picture Audio Channel Settings
Music
RAW
English
Off
Off
Select Previous
MENU EXIT
www.insigniaproducts.com
5 Press EXIT to close the menu.
Note

Selecting the audio mode

You can select the audio mode for analog channels.
To select the audio mode for analog channels:
• Press MTS/SAP on the remote one or more
times. You can select:
70
75
50
Exit
Note
To select an audio track for a digital channel:
• Press MTS/SAP. If an audio track is available, it
plays.

Changing channel settings

70
75
50

Automatically scanning for channels

Note
Exit
When you scan for channels, your TV/DVD combo
searches for channels available in your viewing area
and stores the channel information in the channel
list. When you press CH and CH , your
TV/DVD combo tunes to the next channel in the
channel list and skips any channels that were not
stored in the list.
To automatically scan for channels:
1 Press TV MENU, then press
the Channel icon. The Channel menu appears.
Channel
Antenna/Cable
Auto Channel Search
Add/Skip Channels
Favorites
Channel Label
Channel Strength
Auto Zoom
Adjust channel options.
2 Press
• If you adjust Treble, Bass, or Balance, your
TV/DVD combo automatically changes the
Sound Mode to Custom.
• The Audio Only function becomes active about
10 seconds after the TV menu closes.
• Mono—Select this option if there is noise
or static on weak stereo broadcasts.
• Stereo—Select this option for programs
broadcast in stereo.
• SAP—Select this option to listen to a
secondary audio program, if available.
Mono is automatically selected if the program is
broadcast in mono.
You do not need to scan for channels unless the
available channels changed after you ran the Setup
Wizard. For more information, see "Turning on your
TV for the first time" on page 16.
Picture Audio
Move OK Select Previous
MENU
ENTER
to access the Channel menu.
or to highlight
Channel Settings
Antenna
On
Exit
EXIT