Technical Specifications; Limited Warranty - Garmin GSC 10 - Speed Instructions Manual

Instructions (multilingual)
Hide thumbs Also See for GSC 10 - Speed:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Battery
cover
CR202
battery
2. Use a coin to twist the
cover counter-clockwise
until it is loose enough to
remove (the arrow points
to unlocked).
3. Remove the cover and
battery.
4. Wait 30 seconds.
5. Insert the new battery
with the positive side
facing up.
NOTE:Be careful not to
damage or lose the O-ring
gasket on the cover.
6. Use a coin to twist the
cover back into place (the
arrow points to locked).
Battery cover
Arrow
Technical
Specifications
Physical size: W × H × D:
2.0 × 1.2 × 0.9 in.
(5.1 × 3.0 × 2.3 cm)
Weight: 0.9 oz. (25 g)
Unlocked
Locked
Water resistance: IPX7
Transmission range:
approximately 9.8 ft.
(3 m)
Battery: user-replaceable
CR2032 (3 volts)
Perchlorate Material –
special handling may
apply. See
www.dtsc.ca.gov
/hazardouswaste
/perchlorate.
Battery life: approximately
1.4 years (1 hour per
day)
Operating temperature
range: from 5°F to
158°F
(from -15°C to 70°C)
Radio frequency/
protocol: 2.4 GHz/
ANT+ wireless
communications
protocol
System Compatibility:
ANT+

Limited warranty

Garmin's standard limited
warranty applies to this
accessory. See the Important
Safety and Product
Information guide in the
Forerunner or the Edge
product box.
EN–

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Speed/cadence bike sensorGsc 10

Table of Contents