Sanyo VPC-X1200BK Instruction Manual page 58

Problem
The colors of
the images
captured
indoors are not
correct.
A part of the
Viewing
image is
images
missing.
"No image" is
shown.
You cannot
Image
edit or rotate
editing
an image.
The "Image is
protected"
message
appears and
the data cannot
be deleted.
You cannot
save a file size
Misc.
equivalent to
the stated
capacity of the
card.
Cause
This is due to
ambient
lighting.
The white
balance setting
is incorrect.
The handstrap
or a finger was
blocking the
lens.
There is no
image stored in
the installed
card or the
internal memory.
The protect
mode is set.
You have
attempted to
delete data
that is
protected from
accidental
erasure.
The recording
capacity is less
than the value
specified for
the card.
Action
Capture the
image using
the forced flash
mode.
Set the white
balance setting
correctly.
Hold the camera
correctly, and
make sure the
lens is not
obstructed.
Play back after
capturing
images.
Cancel the
protect mode.
Cancel the
protect mode.
Depending on
the card, the
capacity may
be less than
the specified
value. Please
refer to the
instructions
that
accompanied
the card.
English
Reference
page
B-48
A-6, 15
—
—
A-8
A-8
B-59
56