Focus Area Setting - Sanyo VPC-X1200BK Instruction Manual

RECORDING SETTINGS

Focus area setting

You can choose from different types of autofocus:
9-point range finder focus:
The correct focus is determined from 9 different focus points within the
shooting area visible on the monitor. When the image is focused, a target
mark & appears.
Spot focus:
The camera focuses on the subject in the center of the monitor.
AF seeker:
Once the focus is locked on a subject, it follows the subject. The focus point
automatically changes to remain continuously focused on a moving subject.
HINT
When spot focus is selected...
i The focus mark + appears in the center
of the monitor.
When AF seeker is selected...
i The focus mark + appears in the
center of the monitor.
i When the focus-lock is activated, the
seeker mark appears on the focused
subject.
i During focus-lock, even if the focused
subject moves, the seeker mark
automatically follows the subject.
i If the camera loses the focus-lock on
the subject, the seeker mark
disappears.
i In dark environments, the seeker mark
may follow the subject more slowly.
i When the p setting is selected, the
digital zoom is not available.
13
English
F5.0 F5.0 F5.0
1/83 1/83 1/83
Seeker mark