Sanyo VPC-X1200BK Instruction Manual page 26

Specifying date imprinting and number of prints
You can specify print settings for each individual image (EACH IMAGE), or
apply the print settings to all the images on the card (ALL IMAGES).
1
Display the screen to set the print settings (page 22).
2
Select "EACH IMAGE" or "ALL
IMAGES".
EACH IMAGE:
The set print settings are applied
only to the image currently
displayed.
ALL IMAGES:
The set print settings are applied to
all the still images on the card.
3
Press the SET button.
h The Date/Copies Print Screen
appears.
h If "EACH IMAGE" was selected,
press the [l] or [m] button to
display the desired image to print.
h The print settings for the currently
displayed image are shown in the
upper left area of the monitor. You
can press the [l] or [m] button to
confirm the print settings for each
image.
Specify the printing Specify the printing Specify the printing
instructions? instructions? instructions?
EACH IMAGE
ALL IMAGES
ALL CLEAR
OK OK OK
EACH IMAGE EACH IMAGE EACH IMAGE
:
: 0
0
OK OK OK DATE DATE DATE
English
24