Sanyo VPC-X1200BK Instruction Manual page 32

i If Card B already has files in it when it replaces Card A, file names are
assigned as follows.
When the highest file number on Card B (before replacing) is lower
than the highest file number on Card A: the file name of the next
recorded image continues from last file name recorded on Card A.
Card A
Card B
Previously recorded files
When the highest file number on Card B (before replacing) is higher
than the highest file number on Card A: the file name of the next
recorded image continues from last file name recorded on Card B.
Card A
Card B
Previously recorded files
HINT
i Until the file number continued function is turned "OFF", consecutive file
names are assigned. It is recommended that the file number continued
function be returned to "OFF" at the end of each photography session.
What about the internal memory?
i The file number continued function works the same for the internal
memory.
0001, 0002 ..... 0012, 0013
Replace card
0001, 0002, 0014, 0015 ..... 0025, 0026
0001, 0002 ..... 0012, 0013
Replace card
0020, 0021, 0022, 0023 ..... 0025, 0026
30
English