IBM System x3400 Type 7975 Installation Manual page 76

3. Follow the prompts to complete the installation.
Complete the following steps to install the OSA SMBridge management utility
program on a server running a Linux operating system. You must be logged in as a
root user to perform these procedures.
1. Go to http://www.ibm.com/support/ and download the utility program and create
2. Insert the OSA BMC Management Utility CD into the drive.
3. Type mount/mnt/cdrom.
4. Locate the directory where the installation RPM package is located and type
5. Type the following command to run the RPM package and start the installation:
6. Follow the prompts to complete the installation. When the installation is
The utility starts automatically when the server is started. You can also locate the
/ect/init.d directory to start the utility and use the following commands to manage
the utility:
62
System x3400 Types 7973, 7974, 7975, and 7976: Installation Guide
The installation program prompts you for a TCP/IP port number and an IP
address. Specify an IP address, if you want to limit the connection requests that
will be accepted by the utility program. To accept connections from any server,
type INADDR_ANY as the IP address. Also specify the port number that the utility
program will use. These values will be recorded in the smbridge.cfg file for the
automatic startup of the utility program.
the OSA BMC Management Utility CD.
cd/mnt/cdrom.
rpm -ivh smbridge-2.0-XX.rpm
complete, the utility copies files to the following directories:
/etc/init.d/SMBridge
/etc/smbridge.cfg
/usr/sbin/smbriged
/var/log/smbridge/Liscense.txt
/var/log/smbridge/Readme.txt