Replacing The Side Cover - IBM System x3400 Type 7975 Installation Manual

Replacing the side cover

If you removed the side cover, reinstall it.
Note: You might find it easier to lay the server on its side to replace the side cover.
To reinstall the side cover, complete the following steps:
1. Make sure that all cables, adapters, and other components are installed and
2. Insert the bottom edge of the cover into the bottom edge of the chassis and
3. Press down on the cover-release latch and close the side cover to secure it in
4. Lock the side cover.
seated correctly and that you have not left loose tools or parts inside the server.
Also, make sure that all internal cables are correctly routed.
rotate the cover toward the server.
Cover release latch
Lock
Left-side cover
place.
Chapter 2. Installing options
33